Insulation – Thermal
Fabricated parts made from fiberglass, foam, and synthetic fiber used to insulate surfaces to prevent heat transmission. Laminations may be incorporated on the open side to incorporated facings for heat reflection, cosmetic appearance, durability, and clean-ability. On the application side, pressure sensitive adhesive may be added for easy liner removal and installation of the part. Common applications include HVAC equipment, commercial and consumer appliances, vehicles, and aircraft. Available in cut parts, rolls, and sheets.
Insulation – Electrical
Durable high dielectric strength plastic and fiber based materials fabricated into parts used for safety and regulatory compliance in electronics equipment including servers, power supplies, electrical cabinets, small devices, etc. We offer a variety of material types and thicknesses to match the application for flammability rating (UL 94), dielectric strength and breakdown (ASTM D-149), color, usage temperature, and score-and-fold capabilities. We are an authorized fabricator and distributor of ITW Formex products including the very versatile Formex GK line. Parts may be produced in small or large quantities using processes such as die cutting, laser cutting, punching, adhesive lamination, heat forming, and printing.
Insulation – Acoustic
Panels, blankets, and smaller parts fabricated from fiberglass, open cell foam, and synthetic fiber used to absorb airborne noise at mid-range to higher frequencies. Septum or decoupler layers may be incorporated to address lower frequency problems. Open surfaces may be faced with materials for cosmetic appearance, durability, and clean-ability. The application side of the part may incorporate pressure sensitive adhesive for easy liner removal and installation. Parts of all sizes are commonly fabricated using die cutting, waterjet cutting, and lamination.

Compressor Enclosures
Full acoustical enclosures incorporating fiberglass insulation inside of a flexible vinyl outer shell to form custom fit blanket with easy Velcro fasteners for closure. The vinyl shell is shaped and sealed using fast and reliable radio frequency sealing to prevent moisture from wicking into the insulation. Additionally, a septum layer may be incorporated to address lower frequency problems. A high temperature barrier may be used on the inside surface for contact with hot surfaces. For over 20 years, our manufacturer has been designing, developing, testing, and producing our noise enclosures for use on scroll and reciprocating compressors used in the HVAC industry.

Foam Tapes
Seals and weather stripping made from cellular foam and sponge used in sheet metal assemblies, window and door assemblies, enclosures, vehicles, and aircraft. Closed cell foams such as PVC, neoprene blends, polyethylene, NBR/PVC, and EPDM provide weather tight sealing and long term performance. Open cell sponge made from polyester polyurethane can economically be used for air flow control where minimal pressure differential exists. Double sided foam tapes can be used for attachment and permanent assembly. A variety of base materials, thicknesses, and adhesive combinations are available for specific requirements such as flammability rating (UL 94), color, temperature compressive force, compression set, and cost effectiveness.

Gaskets, Seals, Pads, Cushions
Any of a wide variety of parts made from closed and open cell foam or sponge from suppliers such as ANR (American National Rubber), Rubatex, E-A-R, Armacell, GaskaTape, or W.T. Burnett. Commonly, adhesive is used on at least one surface from makers such as 3M, Adchem, or Concote. Applications are unlimited and we have fabrication capabilities to service both large and small volume needs with our die cutting and waterjet cutting equipment.

EMI/EMC Solutions
Shielding laminates made from aluminum and copper foil and high dielectric insulation films, die cut to shapes that act as reflective barriers and enclosures. Conductive EMI gasketing for grounding enclosures to I/O connections and other metal to metal contact areas in electronics. Applications are common in medical electronics, computers & servers, telecommunications hardware, gaming equipment, and industrial controls.

Thermal Interface Parts
Thermally conductive, but electrically insulative materials for transferring heat in electronics. Small die cut pads, gap fillers, and thin sheets that can easily be placed in an assembly to conform to the 2 mating surfaces. Applications include small or handheld electronics, medical devices, servers, military and aerospace electronics, and telecommunications equipment.

Vibration Isolation & Damping
Specialized materials developed to dissipate vibrational energy in structures and to isolate equipment from shock and vibration. Damping parts are most commonly supplied die cut with adhesive for attachment to sheet metal. Isolators are durable foam rubber parts with adhesive cut to size for cushioning and energy absorption between mating surfaces.

Adhesives
Coated pressure sensitive adhesives and double sided foam tapes for lamination and attachment. We incorporate products from well known suppliers as well as our own Concote Coated Products brand into our foam tapes, gaskets, insulators, EMI shields, and other fabricated parts. Concote brand products are economical and available for purchase in bulk roll form by other fabricators.

Plastic Components
Plastics have a seemingly unlimited range of use and methods of fabrication. We can provide parts from film, sheet, rod, tube, or resin in the form of cut parts, laminated rolls, machined parts, die cut with adhesive, thermoformed or injection molded. Our manufacturer is supplied with some of the best plastics the industry has to offer and we can help you select the right material for your job.

Die Cut Parts
Die cutting is a very diverse and economical process and our manufacturer has equipment to handle all kinds of steel rule and engraved rotary die cutting jobs. Many soft or semi-hard materials lend themselves well to die cutting including rubber, foam, paper, plastic, foils, leather, fabric, and adhesives. We can supply parts made from materials we offer, or those supplied by our customers.

Specialty
The next step up may be someone only being able to get those sexual health pills, it is also very purchase at site purchase cheap cialis simple to buy emergency contraception online. Being sexually very viagra sale canada dominant is the key to a great extent relies on upon professional creatives. It my review here canada pharmacy cialis will be sent at your residential address in no time. There are some sexual disorders that affect both men as well as women but here we discuss the types of men who are more than age of 40. tadalafil in canada In addition to the myriad of products listed above, our manufacturer also frequently participates in projects with its customers that don’t easily fit into a predefined category. Our desire and ability to take on selected special projects is one of the things that our customers say makes us quite unique. With the wide variety of fabrication capabilities we have to offer, we have the resources to do things that have never been done before.

Materials

Plastics
Polypropylene, PVC, ABS, Polycarbonate, Acrylic, Nylon, PVC, Styrene (HIPS), PET, and others in film, sheet, and rod form. ITW Formex authorized fabricator and distributor.

Fiberglass Insulation
Equipment grade light density materials from Johns Manville and Lydall Manning with mat, paper, foil and film facings. Also heavy density board products for acoustics applications.

Foam and Sponge
Open and closed cell materials used for gasketing, cushioning, insulation, sealing, etc. Materials include Neoprene and blends, EVA, Polyethylene, Polyester, Polyurethane, Vinyl Nitrile, EPDM, silicone, and more. Mostly flame retardant or flame rated varieties.

Solid Elastomers
EPDM, Silicone, SBR, NBR, etc with and without reinforcement.

EMI Shielding Materials
Foil Laminates, Conductive Gasketing, Wire Mesh, Conductive and Statically Dissipative Foam

Thermal Interface Media
For heat conduction with electrical isolation in electronics. Thin film and gap filling varieties.

Adhesives
Acrylic and rubber pressure sensitive laminating adhesives; double coated and free-film. Also liquid, solvent, and caulk form for some applications. Commonly 3M, Adchem, and our own Concote Coated Products brand.

Acoustic and Vibration Materials
Open cell acoustic foams with specialty facings, decoupling layers, and adhesive for installation. Also unique vibration dampening materials for sheet metal.

Services
Die Cutting – Laser Cutting – Water Jet Cutting – Vacuum Thermoforming
CNC Routing/Machining – Radio Frequency (RF) Sealing – Laminating
Adhesive Coating – Roll Slitting – Spooling – Sewing
Printing – Tooling – Distribution – Assembly/Kitting – Engineering/Design